ETX-105 FEEDBACK
[Home!]
Last updated: 17 July 2004
This page is for user comments and information specific to the new Meade ETX-105EC and ETX-105AT. Comments on accessories and feedback items appropriate to other ETX models are posted on other pages. If you have any comments, suggestions, questions or answers to questions posed here, e-mail them to me and I'll post them. Please use an appropriate Subject Line on your message. Thanks.


Subject:	ETX 105 Dec Locl
Sent:	Friday, July 16, 2004 08:17:39
From:	Don Sutherland (don_sutherland@yahoo.ca)
Olivier Cioni was asking about the thread size for the dec. lock for his
ETX-105. The screw thread is 10-24 (number 10, 24 TPI).

When I was adjusting the backlash in the dec. drive, I used a 10-24
screw and nut to replace the dec. lock knob and gain access to the
adjuster nut on the worm gear shaft.
 
I hope this helps,
 
Don Sutherland

Subject:	screw size of declination disc
Sent:	Wednesday, June 30, 2004 23:37:43
From:	Olivier Cioni (olivier.cioni@cea.fr)
I don't find the size of screw that are used on my ETX105 to block the
declination disc. Do you know this value ?

Thanks for your help

Olivier Cioni
Mike here: Can you be more specific? I'm not certain what you mean by "block". But I don't have the size anyway. But I might be able to find out.

And:

Yes, in fact, I search the size of the screw used to fix the declination
disc. Maybe I can send you a photo of the screw. On your site, I don t
found this value, I think.

Thank you!

Feedback Archives

Check the Feedback Archives for previous editions of the User Feedback pages.


Return to the top of this page.

Go to the ETX Home Page.


Copyright © 2004 Michael L. Weasner / etx@me.com
Submittals Copyright © 2004 by the Submitter
URL = http://www.weasner.com/etx/archive/feedbackJul04/105.html