AUTOSTAR SUITE USER FEEDBACK
[Home!]
Last updated: 23 November 2004
This page is for user comments and information specific to the Meade Autostar Suite. If you have any comments, suggestions, questions or answers to questions posed here, e-mail them to me and I'll post them. Please use an appropriate Subject Line on your message. Thanks. (The Lunar Planetary Imager, LPI, is covered in the Helpful Information - Astrophotography area.)


Subject:	Hi
Sent:	Monday, November 22, 2004 11:07:49
From:	Charles Washington (charles.washington@ntlworld.com)
I am very new to astronomy but have decided to have a good start. I have
an ETX125.

To compliment this I have purchased an LPI camera and with this came the
Autostar suite.

It is here that I seem to have fell at the first hurdle I have loaded
the software and printed of the manuals.

On of the first things explained in the manual is how to turn the
starmap on and off. On the toolbar I have the box which should contain
this toggle but it is empty I also am missing the telescope one as well.
Could you please advise me as to whether this is a common problem and if
there is a patch for it. I have trawled your site and MIGHTY it really
is a project that any person would truly be proud of but have not found
any reference to my problem. Thank you in advance for any info you might
be able to direct me to.

Kind regards Charles Washington      (uk)
Mike here: You likely need to get the update. It is mentioned in my article "Autostar Suite on a Macintosh"; there is also a downloads page for the Autostar Suite. Both are on the Helpful Information: Autostar Info page. Also, PLEASE read the Email Etiquette item on the ETX Site; your message was originally DELETED UNREAD as SPAM due to the ambiguous subject line. Thanks for understanding.
Subject:	Update for AutostarSuite, LPI and DSI posted 
Sent:	Saturday, November 13, 2004 17:27:08
From:	Richard Seymour (rseymour@wolfenet.com)
On 12-Nov-2004, Meade posted a combined update for the
Autostar Suite (StarMap), the LPI and the DSI.

It is now version 3.18  (previous update was 3.16a, release was 3.08)

Visit http://www.meade.com/autostar/update/
for the download, and read the sub-pages for what got better.

This update allows you to use the LPI under the DSI's control program.

have fun
--dick

Feedback Archives

Check the Feedback Archives for previous editions of the User Feedback pages.


Return to the top of this page.

Go to the ETX Home Page.


Copyright ©2004 Michael L. Weasner / etx@me.com
Submittals Copyright © 2004 by the Submitter
URL = http://www.weasner.com/etx/archive/feedbackNov04/autostar_suite.html