Cassiopeia Observatory logo
[Home!]

DS, DSX, OLDER MODELS FEEDBACK

Last updated: 28 May 2012

This page is for user comments and information specific to the Meade DS, DSX, and some older telescope models. Accessories and Feedback items appropriate to the ETX models are posted on other pages as appropriate. If you have any comments, suggestions, questions or answers to questions posed here, e-mail them to me for posting. Please use an appropriate Subject Line on your message per the Site Email Etiquette. Thanks. Remember, tips described on this site may invalidate the warranty on your telescope or accessories. Neither the submitter nor myself are responsible for any damage caused by using any contributed tips.


Subject:	Meade ds2102
Sent:	Saturday, May 26, 2012 03:25:59
From:	Roy Podesta (roy.podesta@tiscali.co.uk)
I have an old Meade ds2102 with the single arm goto mount that appears
to be the same as the  current mount. Ever since new this mount has been
very noisy when tracking and I have been led to believe that the answer
could be to remove the old grease and to regrease and reset. Problem is
that I have no idea how to get the bits of the mount apart. Can you
suggest a way of doing this or the address of somebody who knows? Thank
you.
Cheers,
Roy Podesta
Mike here: There are a few DS mount articles on the Helpful Information: Telescope Tech Tips page on my ETX Site that may assist you.


Feedback Archive

Check the Feedback Archive for previous editions of the User Feedback pages.


Go to the ETX Home Page.


Copyright © 2012 Michael L. Weasner / etx@me.com
Submittals Copyright © 2012 by the Submitter
URL = http://www.weasner.com/etx/archive/may12/ds_dsx.html