AUTOSTAR SUITE USER FEEDBACK Last updated: 25 August 2008

This page is for user comments and information specific to the Meade AutoStar Suite. If you have any comments, suggestions, questions or answers to questions posed here, e-mail them to me and I'll post them. Please use an appropriate Subject Line on your message. Thanks. (The Lunar Planetary Imager, LPI, and Deep Sky Imager, DSI, are covered in the Helpful Information - Astrophotography area.)

Subject:	Halley's comet
Sent:	Friday, August 22, 2008 22:52:51
From:	Marc Widdowson (marc@stoics.fsnet.co.uk)
I don't know if this is in your area, but I am surprised Halley's comet
is not included as an object in the PC astronomy program that came with
my Meade ETX-125PE (Meade Autostar Suite Astronomer's Edition), and I
wonder if there is any way to get it in there. Thanks.
 
Marc Widdowson

And:

Thank you very much. 

Subject:	Fix for email labeled AutoStar Suite Version 5 Network Problem dated July 14
Sent:	Monday, August 4, 2008 14:58:22
From:	Alan Hawkins (alan_hawkins@comcast.net)
I ran into this same problem as Mike Hogan and found out that it was
Autostar Suite that was holding the port in use. The Autostar Net Scope
program actually opens up five consectutive ports starting with the one
you specify in the Network Port field. For some reason on program
starup, Autostar hold 5405, you can test this by typing in "netstat
-ano" in the command line program (dos prompt). This will give you the
Process ID number for the program holding on to 5405. You then can open
up the task manager to see the name of the program associated with that
PID. So when you try to start the default port Net Scope tries to open
5401, 5402, 5403, 5404, and 5405, which gives you the conflict on 5405.

The good news is there is an easy fix, Just choose 5400 for your Net
Scope port. This will hold 5400, 5401, 5402, 5403, and 5404. You will be
able to communicate with the scope via Autostar Suite and Envisage.
 
Alan Hawkins
Woodstock, GA
 
Original posting:
	Subject:    AutoStar Suite Version 5 Network Problem
	Sent:   Monday, July 14, 2008 12:02:22
	From:   mhogansr@comcast.net (mhogansr@comcast.net)
	I updated to AS Suite v5 from the Meade site and could no longer get the
	Network Server to work. The program started OK but when I check the
	'Listen' box, I get the error "Address is in use". Clicking OK shuts the
	program down. I went back to the previous version and every thing works
	normally with exactly the same settings as I used in v5.
	
	I'm using a Serial-to-USB adapter, configured for COM 2 and XP Home.
	Have you or anyone else tried the new version and gotten this function
	to work?
 
	Regards,
	Mike Hogan

Feedback Archives

Check the Feedback Archives for previous editions of the User Feedback pages.

Go to the ETX Home Page.