Last updated: 19 May 2001

Sent:	Thursday, May 17, 2001 7:53:20
From:	pillows@voyager.net (pillows)
For users with an uncoupled Electric Focuser.

Here is the solution as provided by Meade's tech dept.

Remove the foucser housing but leave the brass gear in place. Grasp the
gear, pullback firmly while turning counterclockwise. This action will
screw the focuser shaft back into the O.T.A. Now focus manually and only
then reinstall the housing. Your back in business!

Al Kaminski

Go back to the Tech Tips page.

Go back to the ETX Home Page.

Copyright ©1998-2001 Michael L. Weasner / etx@me.com
Submittal Copyright © 2001 by the Submitter
URL = http://www.weasner.com/etx/techtips/electric-focuser.html